Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Beaumont?
Chimney liner and rebuild work in Beaumont typically runs from about $2,400 to $7,500 depending on whether you need a reline, partial masonry repair, or a full chimney rebuild. A standard stainless reline for a single-story home lands around $2,800 to $4,600, HeatShield liner resurfacing falls near $1,900 to $3,200, and a full chimney rebuild can reach $6,000 to $15,000 when the stack comes down to the roofline and goes back up. Every job is priced from a written estimate after we see the flue, the firebox, and the exterior masonry in person.
Those ranges are for the Beaumont market going into 2026. Inside them, the single biggest swing is what shape the existing system is in. A cracked clay liner in a sound chase is a straightforward reline. A chimney that’s pulling away from the house because years of Gulf humidity have worked into the mortar joints is a rebuild, and it costs what a rebuild costs.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the work breaks down by line item. These are typical Beaumont ranges, not firm quotes. The written estimate you get on site sets the final price, and it’s free.
| Work | Typical Beaumont range (2026) | What it covers |
|---|---|---|
| Level 2 chimney inspection | $175 – $425 | Video scan of the flue, firebox and exterior, with a written report |
| HeatShield liner resurfacing | $1,900 – $3,200 | Resurfacing a deteriorating flue without pulling it out |
| DuraFlex stainless reline (single-story) | $2,800 – $4,600 | New flexible stainless liner, insulation and top plate |
| DuraFlex stainless reline (two-story or offset flue) | $3,900 – $6,200 | Longer run, offset handling, more labor hours |
| Firebox rebuild (brick and mortar) | $1,600 – $3,800 | New firebrick, refractory mortar, damper check |
| Crown repair or rebuild | $650 – $1,800 | Reforming the crown, sealing the flashing line |
| Partial masonry rebuild (upper stack) | $2,500 – $5,500 | Removing and replacing the top courses of brick |
| Full chimney rebuild (roofline up) | $6,000 – $15,000 | Full teardown and rebuild, new cap and flashing |
| Gelco or Famco cap installed | $300 – $725 | New cap to keep rain and animals out of the flue |
| Olympia Chimney liner components or accessories | $120 – $600 | Top plates, connectors, terminations and related parts |
A liner and a rebuild are different jobs, and it helps to keep them straight. A reline fixes the inside of the flue so smoke goes up and out instead of into the house. A rebuild fixes the structure around it, so the chimney stays standing and watertight. Lots of Beaumont jobs need both, and that’s why a homeowner who came in expecting a $3,000 reline sometimes hears a number closer to $8,000. The cost climbs when the flue has multiple offsets, when the existing liner is so far gone it has to be chipped out, when the chimney sits on a two-story roof, or when scaffolding is required. It drops when the flue is straight, the crown is sound, and the liner can go in without disturbing the masonry.
What Affects Chimney Liner & Rebuild Pricing in Beaumont
Pricing here isn’t just a function of labor hours. A few local realities push numbers up or down, and they’re worth understanding before you get a quote.
- Humidity load on masonry. Beaumont’s Gulf humidity is heavy for much of the year, and that moisture works into brick and mortar joints. A chimney that looks fine from the ground can have soft brick behind the flashing. That’s why our inspection uses video and why the estimate sometimes gets revised once we’re up top.
- Roof pitch and access. Beaumont’s older homes often have steep or complex roof lines. When the chimney sits on a steep slope, our technicians need to set up safely, and that setup time is part of the price you see.
- Original construction. Much of the housing stock in Beaumont predates modern liner standards. Older homes frequently have unlined or clay-lined flues that no longer meet current code, so a reline isn’t optional there, it’s a safety requirement.
- Flue configuration. A straight vertical flue relines faster than one with offsets or a 30-degree turn. Offsets require a flexible system, which is exactly why DuraFlex is our go-to for older chimneys. Offset flues are more common in mid-century homes than newer builds.
- Cap condition. A missing or damaged cap lets rain straight into the flue. If the cap is gone, our estimate will almost always include a Gelco or Famco cap, because a fresh liner under a roofline with no cap is money spent twice.
- Extent of the rebuild. A crown repair is a few hundred dollars. A roofline-up rebuild is a major masonry job with materials, disposal and finish work. Where your chimney falls on that line drives the number more than anything else.
Liner or Rebuild: Which Do You Actually Need?
Most homeowners don’t know whether they need a liner or a rebuild until someone qualified looks. The honest answer starts with a proper inspection. A Level 2 inspection uses a camera to see the full inside of the flue and checks the structural exterior. That’s the difference between guessing and knowing.
Here’s how the decision usually breaks down:
- Liner still intact, but flue walls degrading. HeatShield resurfacing is often the right call. It restores the flue surface without removing the existing liner, and it typically comes in thousands of dollars below a tear-out reline.
- Liner cracked, missing or failing code. A DuraFlex stainless reline is the standard fix. It’s engineered for chimney flues, handles offsets, and provides a continuous liner from firebox to cap.
- Masonry soft or separating. A rebuild is in order. A reline inside a chimney that’s falling apart just puts good money inside bad structure.
- Both. Common in Beaumont homes. The chimney gets rebuilt and relined together, and doing them at the same time saves labor versus two separate jobs.
We offer inspection as a standalone service for exactly this reason. If you want a straight assessment of what’s actually there before committing to any repair, that’s a reasonable place to start, and it isn’t tied to selling you anything afterward. Our chimney sweep Beaumont work, repair and inspection run as one team, so you don’t have to line up three contractors for a single system.
How Liner Materials and Brands Affect the Price
Materials are where pricing varies most between contractors, and also where the difference matters most. A reline using improvised, off-brand liner material can look cheaper up front and cost more over time. We work with an intentional set of professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. These are the names chimney specialists trust for liner systems, caps and components, and each is specified for the job it does.
HeatShield is built for liner restoration, which means we can resurface a deteriorating flue rather than replace it outright. DuraFlex is a flexible stainless lining system, which is the right answer for offset flues and older chimneys where a rigid liner can’t make the turn. Gelco and Famco caps protect the top of the system from rain and animals, and Olympia Chimney components handle the termination and connection details. Copperfield covers related masonry and chimney products where the job calls for them.
This is the phrase we come back to: we use the right product for the job, not whatever’s cheapest. Professional-grade materials have a cost, and that cost shows up in the estimate. They also have a lifespan, which is why a well-installed liner outlasts a bargain replacement.
How Much Does a Chimney Rebuild Cost in Beaumont, and When Is It Necessary?
A full chimney rebuild in Beaumont typically runs $6,000 to $15,000, while a partial upper-stack rebuild lands around $2,500 to $5,500. It’s necessary when the masonry itself has failed, meaning soft or crumbling brick, washed-out mortar joints, a leaning stack, or a chimney that has pulled away from the house. A rebuild is also the only permanent fix when the chase is so water-damaged that patching and repointing won’t hold.
Not every repair is a rebuild. Repointing and crown work are far cheaper and are often enough when the damage is surface-level. The way to tell the difference is with a real inspection, not a drive-by look from the yard. If someone quotes you a full rebuild without climbing up and checking the flue with a camera, ask questions.
Can You Line a Chimney Without a Full Rebuild?
Yes, often. If the structural masonry is sound, we can install a DuraFlex liner or apply HeatShield resurfacing without touching the exterior brick. A reline from the roofline down gives you a safe, code-compliant flue with far less disruption and far less cost than a rebuild. The exception is when the masonry has already failed: a new liner inside a chimney that’s moving or crumbling is not a durable fix. That’s why our estimate always addresses both the inside and the outside of the system.
How to Save on Chimney Liner & Rebuild
There’s no single trick to cutting the bill, but a few habits reliably keep chimney costs down. Most of them come down to catching a problem before it spreads.
- Get an inspection before the problem grows. A smaller repair now is almost always cheaper than a rebuild later. A $650 crown fix today can prevent the kind of water intrusion that turns into thousands in masonry work.
- Catch it before the flue fails entirely. If your clay liner is starting to chip or crack but is still mostly intact, HeatShield resurfacing often costs significantly less than a full reline. Early intervention on a degrading liner is the most common money-saver we see.
- Fix the cap before the rain gets in. A missing or broken cap is one of the most common and least expensive causes of a damaged flue. Replacing it is a small line item that protects everything below.
- Keep up with annual sweeping. Regular sweeping catches creosote buildup and liner damage before it becomes structural. It also takes about a fraction of the time of a reline and a fraction of the cost.
- Bundle related work. If you need a reline and a crown repair, doing them together usually beats two separate calls.
- Ask for a written estimate before work starts. No surprises. Our estimates are free, and the price you’re quoted is the price the written estimate sets.
Call (833) 946-8798 for a free estimate. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Why Choose Chimney Sweep Beaumont for Liner and Rebuild Work
Chimney work isn’t the place for a generalist. A handyman can knock a few bricks loose, but a proper reline and rebuild requires knowledge of flue sizing, liner specification, code requirements and the brands that hold up over time. We do chimney work and only chimney work. Sweeping, repair and inspection are all handled by our team, from cap to flue, so you’re not coordinating three contractors.
Our technicians have up to experience with liner and rebuild work. We use DuraFlex for relining and HeatShield for liner restoration, which means repairs are made with products engineered specifically for chimney systems. If a rebuild is required, it’s because the structure demands it, not because it’s an easier sale. The inspection tells you what’s actually there, and the estimate tells you what it costs to fix.
Same-Day Service and What Happens When You Call
When you call, we’ll ask a few questions about the fireplace and the chimney, then book an inspection and estimate. If the problem is urgent, we can often get a technician out the same day. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. We’re closed on Saturday.
A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Once we’re on site, we inspect, explain what we find in plain language, and leave you with a written estimate. No pressure. No upsell theater. The estimate is free, and the price is set per job.
Do You Need a Permit to Rebuild a Chimney in Beaumont?
A full chimney rebuild typically requires a permit, and a homeowner pulling one is often more trouble than it’s worth. Rebuilds involve structural masonry and flashing changes that most local building departments want to inspect. A reline may or may not need a permit depending on the scope and the rules in your part of Beaumont, so it’s worth asking your city’s building department directly before work starts. We’ll tell you what we know and help you understand what’s needed.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Beaumont?
A chimney liner in Beaumont typically costs $2,800 to $4,600 for a single-story home, or $3,900 to $6,200 for a two-story or offset flue. HeatShield liner resurfacing runs $1,900 to $3,200 and can cost less than a full reline when the existing liner is still serviceable. Call (833) 946-8798 for an exact quote. Estimates are free.
Is it cheaper to reline a chimney or rebuild it?
Relining is generally cheaper. A reline in Beaumont runs $2,800 to $6,200, while a full rebuild runs $6,000 to $15,000. A rebuild is only necessary when the masonry has failed. If the brick and chase are sound, a liner or HeatShield resurfacing almost always costs less. Call (833) 946-8798 to find out which applies to your chimney.
Can I get a chimney liner replaced the same day?
Often, yes. A straightforward reline on a single-story home can typically be completed in one dispatch, though larger or offset jobs may stretch into a second. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (833) 946-8798 to book an estimate.
Do I need a permit to rebuild a chimney in Beaumont?
A full rebuild usually needs a permit, while a reline may or may not depending on the scope. Rules vary, and it’s worth a quick call to your city’s building department before work starts. We’ll walk you through what we know. Call (833) 946-8798 with questions, and we’ll book a free estimate.
How long does a chimney rebuild take?
A partial upper-stack rebuild typically takes one to two days, while a full roofline-up rebuild can take three to five days depending on the scale and weather. Drying time for mortar can add to the schedule. Call (833) 946-8798 to get an estimate for your chimney and a realistic timeline.
What’s the most common reason a chimney needs relining in Beaumont?
Cracked or missing clay liners are the most common reason, and Beaumont’s humidity accelerates the wear. HeatShield and DuraFlex are the systems we use most for this. A video inspection confirms what needs doing. Call (833) 946-8798 for a free estimate.
Book a Free Chimney Liner or Rebuild Estimate in Beaumont
If your fireplace has been putting in years of work, the chimney behind it deserves a real look. Whether you need HeatShield resurfacing, a DuraFlex reline, or a full rebuild, we’ll tell you what your system needs and what it will cost, with materials from brands specified for chimney systems. Call (833) 946-8798 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Beaumont market as of 2026. Chimney Sweep Beaumont offers free estimates – call (833) 946-8798.
Written by the team at Chimney Sweep Beaumont.
What Our Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Veronica Garcia"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Sofia Flores"Asked a lot of questions before he came out, which I thought was a good sign. Turned out he was right about what the problem probably was, so it was a quick fix once he got here."
- Rafael Reyes