Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Beaumont Homeowners
A chimney that has never been looked at inside is a chimney you’re guessing about. Creosote builds up where you can’t see it, liners crack behind the masonry, and a cap that lost its seal lets water into the structure a little at a time. Our technicians have up to 14 years of experience reading exactly those conditions, and we offer inspection as a standalone service so the assessment you get is honest before any repair is discussed. If you’ve been putting off a look, we can often schedule a Beaumont inspection the same day. Call (833) 946-8798 and we’ll book it. We answer 24/7.
Fireplace Inspection
Fireplace Inspection covers the firebox, damper, smoke chamber, and the first stretch of flue above the damper, which is where most problems in a working fireplace begin. We recommend one when you’ve moved into a home with a fireplace you’ve never used, after a season of heavy burning, or whenever smoke comes back into the room instead of going up. What Chimney Sweep Beaumont does is a visual and tactile check of every surface we can reach, with photos of anything that looks marginal. A fireplace inspection in Beaumont typically runs $75 to $150, and the written estimate sets the final price before any work is agreed.
Firebox and Damper Check
We look for cracked firebrick, gaps in the mortar joints, and a damper that no longer seals flat. A damper that stays partly open wastes heat all winter and lets outside air down the flue when the fireplace is cold.
Smoke Chamber Condition
The smoke chamber is the tapered section above the damper and it’s where smoke slows down and can spill. Rough or parged-over surfaces there change how the fireplace draws, and we note them plainly.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services at Chimney Sweep Beaumont cover the whole system from the crown down to the firebox floor, not just the flue. You need this when you’re buying a house, after a chimney fire, when you’re changing how you burn, or simply on a regular schedule so small issues don’t become structural ones. We offer inspection independently of repair, which means nothing gets recommended without evidence you can see. A standard inspection in Beaumont is typically $75 to $150, and a Level 2 with camera work runs higher. Our chimney sweep and repair work use the same inspection findings, so nothing gets lost between visits.
Exterior and Crown Review
We check the crown, flashing, and masonry joints from the roofline, since water entry usually starts at the top. Cracking in the crown and failed flashing are common and fixable when they’re caught early.
Scheduling Around Burning Season
Most Beaumont homeowners book before the first cool evenings, when the fireplace goes back into use. Getting the inspection done ahead of that means any repair can be finished before you need the fire.
Chimney Flue Inspection
Chimney Flue Inspection focuses on the vertical passage itself: the clay tiles, the joints between them, and how freely gases can move up and out. You need it whenever there’s been a fire in the chimney, whenever creosote has built up past a glaze, or when you notice a smell from the fireplace on warm days. We run a camera down the flue and review the footage with you rather than handing you a verdict. Flue inspection in Beaumont typically costs $75 to $150 as part of a standard visit, and camera work raises that range. The written estimate sets the final price.
Creosote and Soot Buildup
Creosote in its glazed form is what fuels chimney fires, and it doesn’t sweep out with a brush the way soft soot does. When we find it, we say so and explain what removal involves.
Tile Joints and Offsets
Clay tiles shift and crack over time, especially at joints and where the flue changes angle. An offset flue is also harder to sweep clean, which is why we check how a brush actually travels it.
Chimney Fire
Chimney Fire damage is often invisible from the room, which is why any fire in the flue deserves a proper look before the fireplace is used again. You need an inspection after a chimney fire even if it was brief and put itself out, because the heat can crack tiles and warp metal components without any obvious sign from below. Chimney Sweep Beaumont inspects the flue, firebox, and any components exposed to the heat, and we tell you plainly what can stay and what has to be replaced. Post-fire inspection in Beaumont typically runs $150 to $300 depending on access and camera work. Call (833) 946-8798 and we’ll get it booked.
What Heat Does to a Liner
A hot fire can spall the surface of a clay tile or open a hairline crack that widens with each burn. Those cracks let heat reach framing that was never meant to see it.
Why Reuse Waits for a Report
Burning again before the flue is checked risks a second, worse event in a system already weakened. The inspection tells you whether that risk is real or not.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the thorough look you want at a property transfer, after a chimney fire, or when you’ve changed the appliance connected to the flue. It goes beyond what’s visible from the firebox and adds camera work through the flue, plus checks of accessible attic and roof areas. We use that footage to document condition rather than to justify work. Level 2 inspection in Beaumont typically costs $150 to $300 depending on roof access, flue configuration, and how much camera time the system needs. The written estimate sets the final price before we start.
When a Level 2 Is Called For
Buying or selling a home is the most common reason, and a recent fire or a change in fuel appliance is the next. A standard annual check doesn’t reach the same places.
Documentation You Keep
We share the camera findings and photos so you have a record of the system’s condition. That record is useful for insurance, for a sale, and for tracking changes year to year.
Chimney Leak
Chimney Leak symptoms usually show up inside the house first: staining on the ceiling near the chimney, damp masonry, or a musty smell after rain. You need an inspection when water is getting in, because the source is rarely where the stain appears and guessing at it wastes money. We check the crown, flashing, cap, and masonry joints to find where water actually enters, and we use Gelco and Famco cap products where a missing or failing cap is the cause. Leak diagnosis in Beaumont typically falls in the $150 to $300 range, with repair quoted separately. Nothing is recommended without photo evidence you can see yourself.
Crown, Flashing, and Cap
The crown sheds water off the top of the chimney and cracks as it ages; flashing seals the joint where the chimney meets the roof. Either one failing sends water down into the structure.
What Can Safely Wait
Not every leak needs immediate work, and we say so when it doesn’t. A small crown crack can often be monitored; active water into the ceiling should not wait.
Chimney Camera Inspection
Chimney Camera Inspection puts a light and lens down the flue so we can see what no brush or mirror reaches, including cracks, gaps, and heavy creosote glaze. You need it whenever a problem is suspected but not visible, when a home is changing hands, or when the flue has an offset that hides part of its length. We review the footage with you instead of summarizing it later. Camera inspection in Beaumont is typically part of a Level 2 visit in the $150 to $300 range. The written estimate sets the final price, and we tell you when a camera isn’t necessary.
What the Camera Reveals
Missing mortar between tiles, cracked tile faces, and gaps at the top of the flue all show up clearly on camera. So does buildup that a visual check from below would miss entirely.
Reading the Footage Together
We walk through the recording with you and point out what we’re seeing as we go. You shouldn’t have to take a repair recommendation on faith.
Brands We Service
We work with a set roster of professional chimney brands because the material you put inside a flue matters long after the job is done. HeatShield is what we use for liner resurfacing, a product designed to restore a deteriorating flue without pulling the whole thing out. DuraFlex flexible liner systems are our choice for relining older or offset flues where a rigid liner won’t travel cleanly. Both are engineered for chimney systems specifically rather than adapted from general construction materials.
On the weatherproofing side we work with Gelco and Famco cap products, and Olympia Chimney and Copperfield components round out the roster where they fit the job. We service HeatShield and DuraFlex installations and know where each one tends to wear. We’re not tied to a single manufacturer, so the recommendation follows the flue in front of us, and whether you have HeatShield, Gelco, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. A fireplace that used to draw well and now doesn’t is telling you something changed in the flue or the smoke chamber. It’s worth a look before the next burn.
- Strong odor from the fireplace on warm days. That smell is usually creosote or moisture, and both point to buildup or water entry. Neither resolves on its own.
- Dark staining on the ceiling or chimney breast. Staining near the chimney means water is finding a path inside. A leak inspection finds the actual source rather than sealing over the symptom.
- Visible cracks in the firebox or mortar. Cracks in firebrick or joints let heat past the barrier that’s meant to contain it. They widen with use, so earlier is cheaper.
- It’s been more than a year since the last look. An annual check catches small problems while they’re still small. After a long gap, a camera inspection is the honest starting point.
Our Process, Step by Step
- 1
We book the visit around your schedule. We confirm what type of inspection you need and whether camera work is likely, so there are no surprises when we arrive. Fast dispatch from 7am to 7pm, Sunday through Friday.
- 2
We protect the room before we start. Drop cloths go down around the hearth and we set up without tracking soot through the house. Cleanliness matters as much as the findings.
- 3
We inspect from the top down. The crown, cap, and flashing get checked first, then the flue by camera, then the firebox and damper. We photograph anything marginal as we go.
- 4
We sit down with the findings. You see the footage and the photos, and we explain what’s a real problem, what’s cosmetic, and what can safely wait a season. Nothing is recommended without evidence behind it.
- 5
You get a written estimate for any repair. The price is set per job by that written estimate, whether the fix is a cap, a crown repair, or HeatShield resurfacing. You decide from there.
How Much Does Chimney Inspection Cost in Beaumont?
Chimney inspection in Beaumont typically runs $75 to $150 for a standard visual check, and $150 to $300 for a Level 2 with camera work. A post-fire inspection usually lands in that same upper range, since the flue needs camera attention and the firebox gets a closer look. A leak diagnosis sits in the $150 to $300 band as well, because finding the entry point takes more time than confirming the damage.
What moves the price is access and scope. A steep roof, a flue with an offset, or a chimney that needs a camera all add time. So does a system that hasn’t been looked at in years and needs a full sweep before anything can be properly inspected. A simple visual check on an accessible chimney is at the low end.
To avoid overpaying, ask what the inspection covers and whether camera work is included, and make sure any repair recommendation comes with photos or footage. Our inspection is free-standing, so the assessment isn’t tied to selling you the fix. Call (833) 946-8798 for an exact quote – estimates are free.
Our Service Area Near Beaumont
We look after chimneys across Beaumont and the surrounding towns, including Nederland, Lumberton, Port Neches, Groves, Silsbee, Bridge City, Mauriceville, Port Arthur, West Orange, Vidor, and Central Gardens. Response times depend on how far out you are and what the schedule looks like, so we’ll give you a realistic window when you book rather than a promise we can’t keep. Homeowners in Beaumont usually get the earliest openings.
Serving Beaumont, TX – Our Local Coverage Area
We serve Beaumont and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Beaumont
A chimney inspection is a professional assessment of your chimney system’s condition, covering the flue, firebox, damper, crown, cap, and flashing. It tells you what’s actually there rather than what justifies the next repair. We document findings with photos and camera footage, and we offer it as a standalone service so the assessment stands on its own.
A standard inspection usually takes 45 minutes to an hour. A Level 2 with camera work runs closer to 90 minutes, since the flue gets recorded and checked section by section. Roof access and flue configuration both affect the timing, and we’ll tell you which one applies when you book.
A standard inspection in Beaumont typically runs $75 to $150, while a Level 2 with camera work runs $150 to $300. The exact figure depends on roof access, flue configuration, and whether camera work is needed. The written estimate sets the final price. Call (833) 946-8798 for an exact quote – estimates are free.
Yes. We install and service HeatShield liner resurfacing and DuraFlex flexible liner systems, along with Gelco, Olympia Chimney, Famco, and Copperfield components where they fit the job. We know where each one tends to wear and what condition calls for replacement rather than restoration. Whether you have HeatShield or any other make, we can help.
Often, yes. Same-day inspections depend on the day’s schedule, and we’ll tell you honestly what’s open when you call. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. Call (833) 946-8798 and we’ll find the earliest opening.
Warranty terms depend on the specific repair and the product involved, and we put them in writing with the estimate. We don’t quote a blanket warranty that ignores what the job actually is. You’ll know exactly what’s covered before any work begins.
Clear the hearth area and make sure we can reach the fireplace without moving furniture, and avoid burning for at least 24 hours beforehand so the flue is cool. If you know when the chimney was last swept or inspected, that helps. Beyond that, you don’t need to do anything.
Schedule Your Chimney Inspection Service in Beaumont Today
A chimney inspection is the cheapest way to find out whether your fireplace is safe to use, and it’s the only way to know what’s actually inside the flue. Call (833) 946-8798 to book yours. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation to proceed with any repair we find.
Written by the team at Chimney Sweep Beaumont.