Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Beaumont?
Chimney cap installation in Beaumont typically costs $185 to $650, and crown repair or rebuild usually runs $300 to $1,400 depending on how much of the crown is damaged and what shape the masonry is in around it. A standard single-flue stainless cap with a mesh spark screen sits at the low end; a large multi-flue custom cap, a full crown rebuild, or a crown combined with tuckpointing pushes toward the top of the range. Every price we give is a written estimate for the specific job, so the number on the page and the number on your estimate are close but the estimate always sets the final price.
Key Takeaways
- Caps are the cheaper part of this equation. Crowns are where the real money shows up because they involve masonry.
- In Beaumont’s humid, storm-prone climate, a missing or rusted cap lets water straight into the flue, and that’s the single most common reason a crown fails early.
- Our technicians have up to experience, and we install caps from Gelco, Famco, Olympia Chimney and Copperfield rather than hardware-store generics.
- Estimates are free, and you can call (833) 946-8798 to book one. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the pricing shakes out line by line for a typical Beaumont job. These are estimated ranges for this market, not promises, and the written estimate is what governs.
| Item | Typical Cost Range | What’s Involved |
|---|---|---|
| Single-flue cap (stock stainless, mesh screen) | $185 – $320 | Fits one flue, standard size, simple install |
| Multi-flue cap (custom-fabricated) | $340 – $650 | Built to cover two or more flues, sized to the chimney |
| Decorative or copper cap | $450 – $900 | Copperfield or similar copper top, longer service life |
| Cap removal and replacement (old cap seized or rusted) | $210 – $380 | Includes prying off the old unit and sealing the new one |
| Crown repair (patching cracks, resealing) | $300 – $700 | Small cracks, hairline splits, missing mortar at the edge |
| Partial crown rebuild (a section replaced) | $600 – $950 | One side or corner broken out or separated from the flue |
| Full crown rebuild | $900 – $1,400 | Old crown removed, new crown formed and sloped to shed water |
| Crown + tuckpointing combo | $1,000 – $1,900 | Crown rebuilt and the mortar joints below repaired at the same time |
What pushes a Beaumont job toward the higher end? Cap size and material first – copper and custom-fabricated units cost more than a stock stainless cap, and a chimney with three flues needs a bigger cap than most stock sizes cover. On the crown side, the real driver is what’s underneath. A crown that cracked because the flue tile below it is loose needs that addressed before the new crown will last. And if the crown has been failing for a while, water has usually gotten into the masonry, which is when tuckpointing or brick repair gets added to the estimate. We’d rather show you all of it up front than add it halfway through the job.
What Affects Chimney Cap & Crown Pricing in Beaumont
- Number of flues. A single-flue chimney in the older neighborhoods around downtown takes a smaller, cheaper cap than a multi-flue layout common on larger homes further out.
- Chimney height and roof pitch. A tall stack means more setup and more time working safely at height. Steep-pitch roofs and awkward roof access add labor, so factor that in if your chimney sits on a steeply pitched roof.
- Material choice. Stock stainless is the budget option. Copper caps from Copperfield cost more but hold up better to humidity and to the sun. We walk you through the trade-off rather than steering you to one.
- Condition of the crown and flue. A crown that’s simply weatherworn is a quick repair. A crown that’s separated from the flue tile, or whose cracks have let water into the brickwork, turns into a rebuild plus masonry repair.
- Local weather load. Beaumont gets heavy rain and the humidity sits high much of the year. That’s exactly the climate that punishes a bad crown and a missing cap, so we size and slope the crown to move water off the chimney fast rather than letting it pool and find cracks.
- Access and permits. If your job needs a permit, that adds cost and time. Most cities require a permit for structural masonry work, so ask Beaumont’s building department whether your crown rebuild needs one, and we’ll confirm it as part of the estimate.
Why a Cap and Crown Matter More Here Than People Think
A chimney cap does two jobs. It keeps rain out of the flue, and it keeps birds, squirrels and leaves out. In a city where it rains hard and often, a chimney without a cap is a chimney taking on water. Water down the flue rusts dampers, degrades the liner and, over time, works into the masonry. The cap is the cheapest insurance on the whole system. A Gelco or Famco cap, properly sized and screened, costs a fraction of what a liner replacement runs.
The crown is the concrete or mortar top that slopes away from the flue. Its whole purpose is to shed water off the chimney rather than into it. When the crown cracks, water runs down between the flue and the chimney wall. That’s where the expensive damage starts. Catching a cracked crown early is a $300 to $700 repair. Missing it for a few seasons is a masonry job many times that.
We install caps from a small, deliberate roster of brands, including Gelco, Famco, Olympia Chimney and Copperfield. These are components built specifically for chimney systems, measured to fit and finished to last. If we find a liner problem while we’re up there, we can address it with the right product rather than improvising – DuraFlex for relining, HeatShield for resurfacing a deteriorating flue without full replacement. One team handles clean, repair and inspect, so you’re not coordinating three contractors on one chimney.
How to Save on Chimney Cap & Crown Work
The biggest savings come from timing. A cap installed before water gets in prevents the liner and masonry work that costs far more later. Beyond that:
- Catch the crown early. If you can see a crack from the ground, get it looked at before the next rainy season. A patch now beats a rebuild later.
- Combine the work. If you need a sweeping or an inspection anyway, have the cap and crown looked at on the same visit. One trip up the chimney is cheaper than two.
- Choose the right cap material for the expected life. A stock stainless cap is fine for a chimney you’ll only think about once a decade. If you want to stop thinking about it, copper is the longer-lived choice.
- Get it in writing. Our estimates are free, and the written estimate is the price. Call (833) 946-8798 to schedule one. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Repair or Replace? The Cap and Crown Question
For a cap, replacement is almost always the answer once it’s rusted through or the mesh is torn. Caps aren’t worth patching – they’re a low-cost component and a fresh one resets the clock. For a crown, repair makes sense when the damage is surface-level: cracks, worn edges, a section that’s separated but the surrounding masonry is sound. Rebuild makes sense when the crown has lost its slope, when large sections are loose, or when the flue tile below is compromised. It’s cheaper to rebuild a crown properly once than to patch it every couple of years.
What Happens When You Call
Call (833) 946-8798 and we’ll set a time for an estimator to look at the chimney. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. On the visit, we check the cap, the crown, the flue and the visible masonry, and we tell you what’s actually there – not what justifies the next upsell. You get a written estimate with the ranges above filled in for your specific chimney. If you also want a full chimney inspection while we’re there, we offer that as a standalone service, so the assessment stands on its own.
If you’re searching for a chimney sweep in Beaumont that handles the whole system – sweeping, repair and inspection under one team – we keep the scope tight and the materials professional-grade. If you’re comparing options in the wider Beaumont area, a legitimate quote should be specific about cap brand, crown method and what’s included. Ask for that, and hold us to it too.
FAQs – Chimney Cap & Crown Cost in Beaumont
How much does a chimney cap cost in Beaumont?
A basic single-flue stainless cap installed in Beaumont runs $185 to $320, while a custom multi-flue cap runs $340 to $650 and copper options cost $450 to $900. The estimate sets the final price. Call (833) 946-8798 for an exact quote – estimates are free.
How much does it cost to rebuild a chimney crown?
A full crown rebuild in Beaumont typically costs $900 to $1,400, while patching smaller cracks runs $300 to $700. If the crown is rebuilt together with tuckpointing on the masonry below, expect $1,000 to $1,900. Call (833) 946-8798 to have yours assessed.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the damage is surface-level: a few hundred dollars for a patch versus $900 and up for a rebuild. Rebuild is the better value when the crown has lost its slope or large sections are loose, because repeated patches add up. A free estimate tells you which side of that line yours is on – call (833) 946-8798.
Can you install a chimney cap and repair the crown the same day?
Often yes. A cap install is a straightforward job, and a crown patch can usually be done on the same visit, with the work running from $300 to $1,000 combined. A full crown rebuild is a separate, scheduled job. Call (833) 946-8798 and we’ll tell you what your chimney needs.
Why does my chimney crown keep cracking in Beaumont?
Most repeat crown cracks in Beaumont come from a missing or failing cap letting rain into the flue and from a crown that doesn’t slope enough to shed water fast in a high-humidity climate. Fixing the cap and rebuilding the crown with proper slope usually stops the cycle. Call (833) 946-8798 for an inspection before the next wet stretch.
Get a Free Estimate on Your Cap and Crown
A chimney cap and crown are small parts of the system with outsized effect on everything below. If your cap is missing, rusted or undersized, or your crown is showing cracks, don’t wait for the next rainy season to find out what water does. Call (833) 946-8798. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Our technicians have up to experience, estimates are free, and you get a written price before any work begins. For everything from a cap install to a full crown rebuild, one team handles the chimney sweep work, the repair and the inspection – and the right product for each job, not whatever’s cheapest.
Pricing reflects the Beaumont market as of 2026. Chimney Sweep Beaumont offers free estimates – call (833) 946-8798.
Written by the team at Chimney Sweep Beaumont.
What Our Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Veronica Garcia"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Sofia Flores"Asked a lot of questions before he came out, which I thought was a good sign. Turned out he was right about what the problem probably was, so it was a quick fix once he got here."
- Rafael Reyes