Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Orange
If your chimney cap has rusted through or your crown is holding water, call Chimney Sweep Beaumont at (833) 946-8798. We repair chimneys across Orange and understand what the Gulf air does to brick and metal here. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Our technicians have up to 14 years of experience and know this stretch of the Sabine well. In Orange, water damage is the usual story: caps rust, crowns stay damp, flashing fails, and small problems become big ones once the rain gets in. Local experience matters because a repair that works inland may not last a season here. We fix the cause, not just the stain on the ceiling.
Why Orange Homeowners Call Chimney Sweep Beaumont for Chimney Repair
Whoever you call should show you why the work is needed, and that’s how we work. We’re a chimney-specific operation in Orange, not a generalist handyman outfit. We only do the three things a chimney needs: sweeping, repair and inspection. That focus keeps our recommendations honest, because we don’t sell anything else.
We work in a defined set of professional-grade materials – DuraFlex for relining, HeatShield for liner resurfacing, Gelco, Copperfield, Olympia Chimney and Famco for caps and weatherproofing. Those are the brands chimney specialists specify for repairs built to last, not off-brand parts chosen to hit a low bid. When we quote a flashing repair or a rebuild in Orange, that quote reflects a component rated for wind-driven rain and salt air, and the written estimate sets the final price with no surprises added later.
Inspections are offered on their own. If something is failing, we show you the photo evidence and tell you plainly when work can safely wait. Response to Orange is fast, and we book jobs for West Orange, Bridge City, Mauriceville and Vidor on the same schedule. One team handles the sweep, the repair and the inspection, so you don’t chase three contractors for one chimney.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Installation in Orange
Chimney Cap Installation in Orange is worth doing on any flue that currently has no cap or a cap that’s letting water or animals in. The job means fitting a correctly sized cap with a stainless or powder-coated mesh that vents freely, sheds rain and keeps squirrels and chimney swifts out of the flue. A typical cap installation runs $185 – $450, depending on the flue size and the material you choose. In Orange, we favor stainless and sturdy mesh, because galvanized mesh pits quickly in salt-laden air off the Gulf. A cap is the cheapest piece of protection on the whole chimney.
What a Quality Cap Does
A proper cap keeps rain from pouring straight down into the flue and deflects the worst of the weather. It also stops debris and birds from nesting, which is half of what we clean out of Orange chimneys. The mesh has to be fine enough for swifts and strong enough to hold against a strong wind.
Why We Fit Stainless on the Coast
Salt-heavy air eats through galvanized components fast. Stainless and heavier-duty mesh cost a bit more up front and last much longer in an Orange county that stays humid year-round. It’s the material the brands we carry build caps from specifically for coastal weather.
Chimney Cap Replacement in Orange
Chimney Cap Replacement in Orange is usually the first fix on a rebuild-era chimney, because many caps installed after Rita and Ike are now fifteen years old and failing. The job involves removing the old cap and its rusted legs or brackets, clearing loose debris from the crown, checking the flue opening, and setting a new cap that fits and seals. A typical cap replacement runs $165 – $395, higher on a large or unusually shaped flue or where the crown needs attention first. A pitted cap that has already let water down onto the damper is a problem you fix now, not next season.
Signs a Cap Has Reached the End
Look for rust stains streaking down the crown, holes in the mesh, or a cap that sits crooked. If water runs onto the damper, the cap has stopped doing its job. That corroded metal in salt-laden Gulf air is the most common sign of failure on these coastal chimneys.
Replacement Without Guesswork
We measure the actual flue opening and set a cap built to fit it, so it sheds water and holds its shape. We check the crown at the same time, because a good cap on a cracked crown just traps water where it does more harm. That’s where cheap jobs fail later.
Trusted Brands We Service in Orange
The brands we install and work on are the ones chimney professionals specify for repair and relining. DuraFlex flexible liner systems handle offset and aging flues. HeatShield restores a deteriorating liner without a full tear-out. Famco and Copperfield caps and weatherproofing components hold up to wind-driven rain, and Gelco caps shield the crown and flue top. We don’t keep parts on a truck or stock them locally, so each job is measured and fitted before we arrive on site. That means the right product for the job and a fast turnaround, not a generic piece that almost fits.
Common Chimney Repair Problems We See in Orange Homes
Moisture and age drive most of the repair calls here, not soot. These are the issues we deal with most in Orange.
- Pitted galvanized caps. Salt-laden Gulf air rusts a galvanized cap through within a decade, exposing the flue to rain. Once the mesh is gone, squirrels and chimney swifts move in and start nesting.
- Cracked and mossy crowns. A crown that stays damp grows algae and moss, then spalls through freeze-thaw cycles. Each crack opens a path for water straight into the masonry and the clay tile liner.
- Seized or rusted-open dampers. In older homes near downtown Orange and along the Sabine, years of humidity leave dampers rusted open or frozen shut. That ruins draft and lets humid air into the firebox year-round.
- Spalling brick and failed flashing. Exterior brick chimneys absorb water, swell and flake, and the flashing around them opens up. On mid-century wood-frame homes, that moisture reaches the wall before anyone notices the stain.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Orange, TX
Repair costs in Orange track the job, and we set the price per job by a written estimate. Some typical ranges: a cap replacement runs $165 – $395, a full cap installation $185 – $450, and mortar repointing $350 – $900 depending on how many joints are open. Crown repair and sealing runs $400 – $1,200, and chimney waterproofing with a breathable masonry sealer runs $300 – $800. Flashing repair typically lands around $250 – $650. A chimney rebuild, when a section of masonry has to come down and be relaid, runs $2,500 – $8,000. The estimate is free. We’ll tell you what’s failing, show you the photos, and say plainly what can wait.
We Also Serve Cities Near Orange
We work around the whole Orange area, not just the city limits. Along with homes in Orange, we book chimney repair for West Orange, Bridge City, Mauriceville and Vidor, where the same humidity, salt air and rebuild-era chimneys show up. If you’re outside those towns, call anyway and we’ll tell you how we can help. Learn more about our full chimney repair service and how we serve Orange.
Serving Orange, TX – Our Local Coverage Area
We serve Orange and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Orange
Once a year, even in a home that lights the fireplace only a few times a season. Orange’s humidity, not soot, is the reason: caps corrode, crowns stay damp, and dampers rust, and an annual look catches those before water reaches the liner. Call (833) 946-8798 and we’ll book an inspection.
Yes. Stainless lasts far longer than galvanized in the salt-laden Gulf air around Orange, where galvanized mesh pits through in a matter of years. Stainless keeps the flue dry and animals out for much longer. Call (833) 946-8798 for a cap quote; estimates are free.
Because the crown never fully dries in this humidity and its surface stays damp. Moss and algae are a sign the crown is holding water, and once it spalls, freeze-thaw cracks open a path into the masonry. We can reseal or rebuild the crown. Call (833) 946-8798.
It’s a repair. A damper that’s rusted open or seized shut needs the hinge and plate fixed or replaced, and a sweep won’t correct it. It’s common on older Orange homes where years of humidity have taken hold. Call (833) 946-8798 and we’ll look at it.
Second-degree creosote is the gummy, glazed layer that forms with some buildup; third-degree is the hardened, baked-on stage that’s a fire hazard and calls for restoration or relining. It matters here because Orange’s humidity lets creosote turn gummy and glaze-prone faster than dry-climate buildup. Call (833) 946-8798; the inspection shows you exactly what stage you’re at.
Book Chimney Repair in Orange Today
If your cap is rusting, your crown is holding water, or your damper won’t budge, call (833) 946-8798. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Estimates are free, the written quote sets the final price, and nothing gets recommended without photo evidence you can see for yourself.
Written by the team at Chimney Sweep Beaumont.