Chimney Repair in Beaumont - Inspected on Camera, Then Priced in Writing

Trusted Chimney Repair for Beaumont Homeowners

Water coming down the inside of the firebox, a cap that tilted in the last storm, masonry that crumbles when you touch it. That’s the point where a sweep alone won’t fix the problem, and it’s exactly what our repair work is built for. We handle chimney repair in Beaumont with professional-grade components from brands like HeatShield, Gelco, Olympia Chimney, and Famco, chosen for the job rather than the lowest bid. Our technicians have up to 14 years of experience diagnosing what’s actually failing, and every repair starts with photo evidence you can look at yourself. We answer 24/7 at (833) 946-8798, and fast dispatch runs from 7am to 7pm.

Call (833) 946-8798

Chimney Cap Installation

Chimney Cap Installation gives your flue a proper lid, a fitted cover that keeps rain, animals, and the leaves that fill Beaumont yards out of the chimney while letting smoke out. It’s the right call on any open flue, and it matters most on a chimney that has no cap at all or one that was never sized right. We fit caps from Gelco and Olympia Chimney to the actual flue dimensions rather than clamping on a generic cover. Typical cap installation runs $250-$600 depending on flue count and cap style, with the written estimate setting the final figure.

Single-Flue and Multi-Flue Caps

A single-flue chimney takes a straightforward cap that bolts to the flue tile. Multi-flue stacks need a wider cap with a screened base sized to span the crown, and we measure both across the top so the fit is right the first time.

Stainless and Powder-Coated Finishes

Stainless caps hold up to wet Gulf-region weather without rusting through. Powder-coated steel offers a lower-cost option with color choices, and both come with screens we mount so they’re easy to remove at sweep time.

Chimney Cap Replacement

Chimney Cap Replacement is the fix when the cap you have has rusted through, lost a leg, or stopped fitting the flue properly. Old caps warp and pull loose in high wind, and a loose cap is worse than none because it can shift and block the flue. We remove the old unit, check the flue tile and crown underneath, then install a new cap from Famco or Gelco so it sits level and stays put. Most cap replacements run $200-$550 depending on cap size and how much of the old hardware has to come off, with a free estimate before any work starts.

What Signals a Cap Past Its Life

Loose legs, rust eating through the seams, or a screen that has torn away all mean the cap has done its job and needs replacing. A cap that no longer sits flat is the one that needs attention soonest.

Removing the Old Unit Cleanly

We cut or unbolt the old cap rather than prying it off and cracking the crown in the process. Old sealant gets scraped away so the new cap seats against a clean surface instead of a lumpy one.

Chimney Liner Installation

Chimney Liner Installation puts a new flue inside the old one, which is the fix when the clay tiles are cracked, spalling, or gone in sections. A damaged liner lets heat and combustion gases reach the masonry, and it’s the most common reason a chimney can’t be used safely. We install DuraFlex flexible liner systems, which thread through older flues and offset configurations that a rigid liner won’t pass. Typical liner installation runs $2,400-$5,800 depending on flue length and liner type. When the tiles are still sound but pitted, HeatShield resurfacing can restore them without replacing the whole liner.

DuraFlex for Offset and Older Flues

DuraFlex’s flexible construction bends through the offsets older Beaumont homes often have. It’s also the practical choice when a flue has a slight jog that would stop a rigid liner cold.

HeatShield vs Full Relining

HeatShield resurfacing seals the inside of a liner that’s still structurally intact but worn. A full DuraFlex install is for liners that are cracked through or missing, and the inspection tells you which one you actually need.

Chimney Flashing Repair

Chimney Flashing Repair seals the joint where the chimney meets the roof, the metalwork and sealant that keeps rainwater out of your attic and ceiling. When flashing pulls away, rusts, or was never installed with a proper cricket, water finds the gap and runs down the chimney chase. We reset and replace flashing so the joint is watertight and the sealant is specific to the roof material. Most flashing repairs run $300-$800 depending on roof pitch, flashing length, and whether a cricket needs to be built. We inspect the whole joint with a camera so you can see what’s failing before the work begins.

Common Points Where Water Gets In

The top edge of the flashing against the chimney is the usual culprit, along with old sealant that has cracked and pulled away. Rusted step flashing along the sides lets water wick in behind the masonry.

What a Cricket Does

A cricket is a small peaked diverter built on the uphill side of a wide chimney to push water around it. Without one, water pools against the back of the chimney and works into the flashing over time.

Chimney Crown Repair

Chimney Crown Repair fixes the concrete top that caps the chimney and sheds water away from the masonry. A crown with cracks, a crumbling edge, or a gap where it meets the flue lets water into the chimney body, which then freezes and thaws its way into the brick joints. We rebuild crowns with a proper slope and a flexible sealant at the flue joint, which is the part most quick patches skip. Crown repair typically runs $400-$1,200 depending on crown size and how much of it has to be rebuilt. We use a flexible crown coating over cracks that haven’t reached the brick yet.

Cracked Crowns and Water Paths

A hairline crack in the crown widens with every wet and dry cycle, and water runs into the masonry through it. Crowns that have lost their slope let water sit instead of shedding it.

Rebuilding vs Sealing

Light cracking at the surface can be sealed with a flexible coating that moves with the crown. A crown that has split through or separated from the flue needs a rebuild so the crown and flue assembly work together again.

Chimney Repair Companies

Chimney Repair Companies in Beaumont range from chimney-specific firms to general handymen, and the difference shows in the materials they use. A generalist often reaches for whatever’s in the truck; a chimney specialist fits components engineered for chimney systems. We work only with professional brands like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we do sweeping, repair, and inspection so you’re not coordinating three contractors. Repair costs vary widely by job, from a $250 cap replacement to a $5,800 liner installation, with the written estimate setting the final price.

What to Ask Before Hiring

Ask what brand of liner or cap they use and whether it’s built for chimneys. Ask whether they inspect before recommending work, and whether the inspection is offered on its own without pressure to buy a repair.

Reading an Estimate

A clear estimate lists what’s being replaced, the product brand, and what it costs. It doesn’t ask for a deposit before anyone has looked at the chimney, and it doesn’t quote a liner before a camera inspection.

Chimney Masonry Repair

Chimney Masonry Repair addresses the brick and mortar joints themselves, which is the fix when spalling bricks, missing mortar, or a cracked chimney body are letting water into the structure. In Beaumont’s humid climate, moisture moves into the masonry and works at the joints year after year. We remove and replace spalled brick, tuck the joints that have weathered away, and repoint with mortar matched to the existing to keep the chimney looking whole rather than patched. Masonry repair typically runs $600-$3,000 depending on the size of the chimney and how much of the face needs rebuilding.

Spalling Brick and Why It Spreads

Spalling is a brick face flaking off because moisture inside the brick is pushing outward. Once a brick starts to go, the ones around it are usually taking on water too, so addressing the first sign saves a larger rebuild.

Repointing Weathered Joints

Mortar joints weather faster than the brick itself, and when they’re gone the chimney body has no seal. We rake out the loose mortar and repack new material so the joints are tight and match the surrounding work.

Brands We Service

We fit and service HeatShield liner resurfacing on flues that are worn but still intact. We install DuraFlex flexible liners when a full reline is needed, and we build with Gelco and Famco caps and crowns so the top of the chimney is protected from the weather. The products are chosen for chimney systems specifically, not borrowed from another trade.

Whether you have a DuraFlex liner already in place and need it checked, a HeatShield-resurfaced flue that needs a look, or a Gelco or Olympia Chimney cap that’s come loose, we can help with whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield, or any other make. If you don’t know the brand, our inspection tells you what’s there.

Signs You Need a Pro Right Now

• Water in the firebox: Rust stains, damp masonry, or water pooled in the firebox points to a failed cap, flashing, or crown. Rain in the wrong place erodes the liner and the brick over time.
• A tilted or missing cap: A loose cap can shift and block the flue or fall completely. A cap that’s gone means rain, birds, and animals are moving in.
• Crumbling masonry or mortar: A brick face that flakes off or mortar joints that recede below the brick are losing the chimney’s outer seal. The damage spreads to the surrounding brick.
• A cracked crown or gap at the flue: Cracks in the concrete top let water into the chimney body. Cracking at the flue joint is the most direct path for water to reach the liner.
• A flue that’s never been checked: An unlined or damaged flue can’t be used safely, and you can’t see that from the firebox. A camera inspection shows what’s actually there before you burn again.

Our Process, Step by Step

1. 1
   Book the visit: Call (833) 946-8798 and we’ll set a time. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
2. 2
   Inspect before recommending: We run a camera through the flue and photograph the crown, cap, and flashing. You see the images before we recommend anything, and the inspection can stand alone without repair work attached.
3. 3
   Written estimate: We write out what’s failing, the brand of product we’ll use, and the cost. Nothing starts until you’ve read it and agreed.
4. 4
   The repair: We fit the component for the job, whether that’s a DuraFlex liner, a HeatShield resurfacing, or a Gelco cap. We clean up afterward and show you the completed work.
5. 5
   Follow-up look: We tell you what to watch and when the next chimney inspection is due. If a repair can safely wait, we say so.

How Much Does Chimney Repair Cost in Beaumont?

Our Service Area Near Beaumont

We handle chimney repair in Beaumont and the towns around it, including Nederland, Groves, Port Neches, Lumberton, Silsbee, Vidor, Bridge City, Mauriceville, Port Arthur, and West Orange. If you’re in Central Gardens and need chimney repair, our technicians reach the surrounding area from the Beaumont side. Vidor homeowners can book the same chimney repair service and the same brands. Call (833) 946-8798 to schedule.

Frequently Asked Questions About Chimney Repair in Beaumont

Schedule Your Chimney Repair Service in Beaumont Today

If your cap is loose, your crown is cracked, or your liner needs a look, call (833) 946-8798. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We inspect first, show you the evidence, and give you a free, no-obligation estimate. Nothing is recommended without something you can see for yourself.

Written by the team at Chimney Sweep Beaumont.